BroadwayBlue
Well-known member
???
Hey everyone. Had a few questions I was hoping someone might be able to assist with.
I'm starting to do some work on my new GT/CS and can't find info on a few things. I searched the forums but can't find the specific answers I'm looking for.
My initial work on it is going to be Brakes all around including Master Cylinder and Springs.
Here are the questions I have. I will post pics after this post with examples of what I am referencing.
1. Exhaust - my car is not a GT, should it have a single or dual exhaust? Currently is it dual. The question I have is that the exhaust pipes stop about halfway under the trunk - is that correct or should it extend more toward the bumper? (Pictures below)
2. The rear quarter windows don't roll up or down. I still need to take off the trim to see why but I was looking through some catalogs and there never seems to be a regulator for the 68 rear windows. Am I missing something? I saw some posts about plastic rollers that go bad.
3. What is the correct paint color for the wheels? The wheels were painted while still on the car and I wanted to freshen them up while I have them off to do the brakes and suspension work. (Pics are below of my wheels)
4. Brakes - I was looking at the Raybestos site and also the Rockauto site for rear wheel cylinders and it kind of confusing. I see one cylinder for the Rear Right Wheel for 4bbl cars, another for the left rear (same number).
Then the same number again is listed for ALL Mustangs (68) and also for 289 2bbl. And then another number for the right rear for 2bbl.
I think I need 17507 for both sides. But I wasn't 100% sure. Not sure if anyone is familiar with this one but figured I'd give it a shot.
Thanks in advance!
Rich
Hey everyone. Had a few questions I was hoping someone might be able to assist with.
I'm starting to do some work on my new GT/CS and can't find info on a few things. I searched the forums but can't find the specific answers I'm looking for.
My initial work on it is going to be Brakes all around including Master Cylinder and Springs.
Here are the questions I have. I will post pics after this post with examples of what I am referencing.
1. Exhaust - my car is not a GT, should it have a single or dual exhaust? Currently is it dual. The question I have is that the exhaust pipes stop about halfway under the trunk - is that correct or should it extend more toward the bumper? (Pictures below)
2. The rear quarter windows don't roll up or down. I still need to take off the trim to see why but I was looking through some catalogs and there never seems to be a regulator for the 68 rear windows. Am I missing something? I saw some posts about plastic rollers that go bad.
3. What is the correct paint color for the wheels? The wheels were painted while still on the car and I wanted to freshen them up while I have them off to do the brakes and suspension work. (Pics are below of my wheels)
4. Brakes - I was looking at the Raybestos site and also the Rockauto site for rear wheel cylinders and it kind of confusing. I see one cylinder for the Rear Right Wheel for 4bbl cars, another for the left rear (same number).
Then the same number again is listed for ALL Mustangs (68) and also for 289 2bbl. And then another number for the right rear for 2bbl.
I think I need 17507 for both sides. But I wasn't 100% sure. Not sure if anyone is familiar with this one but figured I'd give it a shot.
Thanks in advance!
Rich