hi people, i had some electrical problems, so i decided to remove my underdash harness, the blower was not working, i have rectified most problems, but on my ignition connector i have a violet wire that melted what is this for? and on my blower in the manual, is the blower grded to one side and which color is the power for blower? i got a ignition connector from donor car but it is slightly different, there is also a red with white stripe wire spliced together with two blk green wire what is this for? also my car has factory a/c, the repair manual has different varations.

I guess it's to early in the morning for me because I need more info. The power to the blower motor is a yellow wire. What position in the connector is the violet wire, inside the curve, outside the curve, if the curve is held up with the wires facing you, is it X pins from the left, etc. I'm sorry but I can't figure out what "grded" is supposed to be. I just woke up and my brain isn't working yet. I'll help more when I get home from work if someone doesn't beat me to it.

Steve

sorry for not being more clearer, on the connector the violet wire is on the bottom left corner, on the blower is the black wire go to ground on the frame or to a connector that is grounded? the donor connector i have their is a red white stripe wire above the violet wire on connector, what could this be for? on mine the red white stripe wire is loose but spliced to a factory splice with two black green wires. could this wire come from the connector also? i hope i am more descriptive this time if not ask more questions, you guys are very helpful. thanx

Email sent, and I must have been REALLY tired. I was thinking of the steering column connector not ignition. Oops!:embarass:

Steve