• The intent of this Restoration Reference forum is to provide a collection of technical, accurate details to help others in their restorations. These Reference Articles can include photos, descriptions, diagrams, part numbers, concours rules, etc.

    PLEASE ONLY POST VARIFIED INFORMATION. This is a technical forum and the information needs to be as accurate as possible. Please don't post things you've heard second hand or think you remember reading somewhere.

    You may reply to an Article, but only if it serves to give more information or clarify a detail in that Article. These should be a presentation of fact more than a discussion. Off-topic responses will be deleted or moved.

    Thanks!
  • Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.

    If you have problems registering or can't log into your account, please contact Admin.

    Please Note: If you are an existing member and your password no longer works, click here to reset it.

Hood Pins - Photos for reference

admin

Staff member
Administrator
Joined
Aug 18, 2002
Messages
2,049
Here are some reference photos for 1968 GT/CS and HCS quarter turn hood pins. If anyone has any other shots feel free to add them to this thread.

Thanks!

==============================
Misc measurements for locating new holes in a repro hood.
 

Attachments

  • hood_lock_holes.jpg
    hood_lock_holes.jpg
    37.7 KB · Views: 158
  • hood_lock_hole_top2.jpg
    hood_lock_hole_top2.jpg
    87.2 KB · Views: 132
  • hood_lock_hole_top1.jpg
    hood_lock_hole_top1.jpg
    80.5 KB · Views: 124
  • hood_lock_hole_bottom1.jpg
    hood_lock_hole_bottom1.jpg
    82.6 KB · Views: 132
OP
OP
admin

admin

Staff member
Administrator
Joined
Aug 18, 2002
Messages
2,049
Photos of the hood pin assembly:

HCS_parts_038.jpgHCS_hood_locks_006.jpg


Photos of the factory cut hole from underneath. Note the burred edges from the hole saw.

hcs_hoodlock2.jpg hood_lock_hole_bottom2.jpg hood_lock_hole_bottom3.jpg


Photos of the retainer bracket at the grille. This is the latch that receives the pin from above.

HCS_hood_lock_latch_1.jpg HCS_hood_lock_latch_2.jpg HCS_hood_lock_latch_3.jpg
 

bztz4m

Well-known member
Joined
Jan 28, 2007
Messages
153
Question: I have a friend that has a '70 Mach I with the twist locks and is looking for replacement springs. Does anyone know who may carry replacement springs.


Ron
 
Top