CougarCJ
Well-known member
- Joined
- Jul 17, 2006
- Messages
- 2,189
Unless, I am mistaken, it looks like you have a glass fuel filter?
COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
Vacuum connections without Smog
- Thread starter BroadwayBlue
- Start date
Unless, I am mistaken, it looks like you have a glass fuel filter?
6t8-390gt
Well-known member
Rich,
If you want the original look with an electronic ignition I would suggest you send you original distributor to BR Motorsports in Ca. for a rebuild and add the pertronix electronic module under the cap. You will have the best of both worlds. BR Motorsports will clean and refinish the dist. housing, install new bushings, and set the specs. If the vacuum advance needs rebuilt Mike Ulrey in Fla. can get that done. Good Luck.
If you want the original look with an electronic ignition I would suggest you send you original distributor to BR Motorsports in Ca. for a rebuild and add the pertronix electronic module under the cap. You will have the best of both worlds. BR Motorsports will clean and refinish the dist. housing, install new bushings, and set the specs. If the vacuum advance needs rebuilt Mike Ulrey in Fla. can get that done. Good Luck.
OP
OP
BroadwayBlue
Well-known member
Thanks for the info!
I also just bought Bob Mannel's book "Ford Small Block V8, 1962-1969". Great information! I ordered it online and received it in a few days.
I also just bought Bob Mannel's book "Ford Small Block V8, 1962-1969". Great information! I ordered it online and received it in a few days.
