Search results

Thanks for the info, it will give me something to do over the winter months.

What type of paint did you use? I may have to do mine and I wanted to be prepared ahead of time. Thanks

Looks like it, there's also a hole on the driver's side also in about the same place.

I was able to locate most of the plug-in connectors by removing the dash and heater controls. The only thing I'll need to splice will be the hot wire to the circuit breaker above the fuse box. I had to remove the two hold-down brackets for the wiring harness to get to the harness from the...

I have the under-dash wires on order. I just need to trace them back remove the old ones and replace with new. It'll be a project for this winter. Just hope my bod can take the bending under the dash and reaching around behind the dash after I get it out. Fun, fun, fun. Thanks Speedy02 for...

Good day all. I'm hoping someone could take a look at the wiring to the Fog Light switch. Mine no longer work and when I looked at the connection I found that three wires were on the switch side and only two wires on the other connector; however, there looks to be a knob where possibly a wire...

Check out the fuel, does it have water in it? I had the same problem with mine and was able to take care of is with Heet. I've also have used Sta-bil 360l which helps when mine sits for a while.

I guess I should have read the new guidelines on posting. I thought I was having a problem when all the stuff appeared to allow me to post an attachment if I wanted.

Probably had to make room for the coolant container for the oversized radiator. The battery holder is there.

If I'm not mistaken, that is the spacer vent which goes to the PCV valve on the valve cover.

Actually the ignition and door key are the same, the trunk key is different. The door and ignition are have the square head, the trunk is the round head on the keys. Bill

As I was browsing my Facebook page, I noticed an item posted to it. Initially I just read the verbiage then I noticed the Mustang image - it was a 1968 GTCS. Usually when a T-shirt is made with early mustangs it's a fastback or similar. So I thought I should post it here so if anyone was...

Found this while browsing the web: http://mustangattitude.com/mustang/gold_mustang.shtml "Black Hills Gold was a special color for the January 1968, Color of the Month promotion rumored to be in the Denver area only with cars special ordered from the San Jose factory. Although we have...

I just arrived. Staying at the Belmont Motel. A bit late for the dinner meet if there is one. Hope to see you all tomorrow or the next days. Bill

Happy Birthday Ron, Hope yours is a great one. I appreciate the help you have given me the time or two I have inquired. Bill

I've confirmed my order for at least one if not two of the ornaments from a local Hallmark store. They will hold the one or two until I get back home on the 18th. I wish they were a little darker blue though so to match my Special. Bill

I'm wondering as it looks like you've checked out the ignition switch and such, could it be a bad wire from the switch to the coil or whatever? I had a wire which looked whole but it had a broken wire but the coating was still solid. Somehow it got crimped and separated the wire but not the...

Rob, Did my measurement and it is 1.00." Also sent an email to you. Bill

Hi Rob, Before you ask, here is a photo of mine Bill

Marty, The fog/marker light mismatch was the problem. I did the driver's side and it solve that side's problem. Now to do the other, but I'll need to back it out of the garage and it's starting to drizzle here so I shall wait until later. Bill Steve, sent you a PM. Bill