After two rebuilt ps pumps, 3 power steering control valves, a rebuilt slave cylinder and two sets of new hoses, I have a leak free power steering system. I tried to evacuate air from the system before start up by jacking the front end and rotating the wheels back and forth several times. I did this again after cranking the engine and allowing the pump to circulate fluid. Here's the problem. With the wheels on the ground, and the engine at idle, the steering wheel free rotates (hard rotation) to the right, putting the front tires in a full right turn. Takes alot of effort to pull the steering wheel to the left. I think it may be due to air in the system but I'm out of ideas. Anyone out there had this problem? I'm open to ideas and any help would be appreciated.