• Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.

    If you have problems registering or can't log into your account, please contact Admin.

    Please Note: If you are an existing member and your password no longer works, click here to reset it.

1968 Question about rear plate bracket

stangfan

Well-known member
Joined
Jun 12, 2012
Messages
1,890
Location
Victoria BC Canada
I'm waxing the GT/CS and have taken off the rear license plate to wax the valance. I noticed something for the first time. The bracket where the two rubber bumpers mount under the plate has two small holes. Each hole is approx one inch to the inside from each of those bumpers. Do all of the 68s have them, and does anyone know what they would be used for?

Thanks.
 

Ruppstang

Well-known member
Joined
May 22, 2009
Messages
3,080
Should be only 2 holes for the bumpers. Possibly it is a reproduction or PO drilled holes to mount plate or frame from bottom.
 
OP
OP
stangfan

stangfan

Well-known member
Joined
Jun 12, 2012
Messages
1,890
Location
Victoria BC Canada
Should be only 2 holes for the bumpers. Possibly it is a reproduction or PO drilled holes to mount plate or frame from bottom.

The holes are very small, so it can't be for mounting the plate or frame. The backside of the holes are rough and there is no paint inside them. I suspect a PO made them for some strange reason.
 
Top