Search results

https://offerup.co/VT15gtbtWdb Sent from my iPhone using Tapatalk

Nice find! Sent from my iPhone using Tapatalk

Thanks! All the cars look incredible. Sent from my iPhone using Tapatalk

Last update. I flipped the pins and all is working well, as far as I can tell. Thanks for al you help! Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Here’s the latest. The is the best picture of the car’s lead that feeds the rear. As you can see, two wires feed on connector and a single wire feeds the other. The two wire connector feeds the black and red wire from the rear harness, and the single wire feeds the black wire. For what’s it’s...

Marty, Are you referring to the reverse light switch connection or the shifter linkage? In other words, check to see if the park position has cleared the reverse location. For what it’s worth, I because of interior paint overspray, I’m unable to tell the color of the wire from the dash that...

Sent from my iPhone using Tapatalk

So here’s the latest on this taillight issue. I just replaced the harness that runs from the kick panel to the rear. While removing the old one, I discovered that it was pinched by the plate from the door hinge, which must have occurred when the car was being assembled at the body shop. That...

I didn’t get a chance to do that yet. I wanted to hold off on removing the number and rear panel until I can get an extra set of hands to help me out. Sent from my iPhone using Tapatalk

Thanks for the direction. I finally got a bit of free time today and decided to start with checking the connection that’s located on the kick panel and it looks like the harness that comes out of the dash area does have power. That said, it looks like the point of failure is somewhere in the...

Sorry for the delayed response. I’d like to get the hardware for the original set (black o-rings). I’ll shoot you a private message with my info. Thanks! Sent from my iPhone using Tapatalk

Rick, What color is your interior? I have an extra light blue one that’s not split and an ok driver. If you’re interested, you can have it for free, just pay for the shipping. Message me your info. Cesar Sent from my iPhone using Tapatalk

Hopefully you guys can help me with an issue I’m having with my taillights. I don’t have any parking lights; however, my brake lights, turn signals and emergency flashers work. Everything worked prior to sending my car out for paint but I’m having the hardest time figuring out what could be the...

Arlie, I have two sets. The original ones that came with my car (chrome has seen better days) and a set that I purchased off someone from this group. The originals have a black grommet and the other set has a grey cone. For what it’s worth, my previous car had a rectangular washer that was...

I emailed mine yesterday. -Cesar Sent from my iPhone using Tapatalk

The wife and kids finally gave me some time to tackle this. I took your advice Marty, and went the solder route. I purchased some heat shrinking solder connectors and it worked quite well. Thanks for the help! Cesar Sent from my iPhone using Tapatalk

It looks like the new owner is selling it on craigslist. https://losangeles.craigslist.org/lac/cto/d/riverside-1968-ford-mustang-california/7180988151.html

Hi fellas, I'm in a bit of a jam and I hope someone can help me out. I purchased a ignition switch repair harness from NPD for my car because I noticed some bad connectors when I was removing the EFI system from my car (the mechanic had tapped into the switch wires). I also suspected that...

You build beautiful cars, Neil! Congrats! Sent from my iPhone using Tapatalk