Search results

Well, I think your GT/CS is just Outstanding! Neil

IIRC, with the shift selector all the way forward in Park, and the C4 lever all the way back, the rod should line up. The rod is slotted to allow the stud on the C4 lever to be inserted and tightened with the nut. Neil

Two 650 CFM carbs? Waay too much carb for a 302, IMHO. Neil

I measured the C4 shift rod for my '68. Its 17 1/2 inches long. (end to end) Neil

Well that's easy enough. You & Val just fly from Seattle to Daytona Beach and drive down to Melbourne.:smile: Neil

Any further info? I'm always interested in a CS project. Neil

Its possible to splice on a ring type terminal on the end of the wire and secure it with a nut. If you want to maintain originality you'll have to replace the harness. Neil

I registered my CS and made hotel reservations for the MCA Grand National show in Melbourne, FL on Labor Day weekend, Sept 4,5,6. Neil

So sorry to learn this. A long time, respected member of our site. R.I.P. Al. And condolences to his family. Neil

Without seeing the entire mounting bracket, I cannot tell. It just looks like the compressor needs to be a quarter inch forward. Being offset the way it appears, the belt will wear and possibly break or sling off. Possibly causing damage. All pulleys must be aligned for smooth operation. I have...

It may be the angle of the photo, but the A/C pulley appears to be misaligned aft a fraction of an inch. Use a straight edge to be sure the pulley grooves are lined up. Neil

50 year old C4 A/T leaks: Red fluid on the floor? I bought a seal kit for the linkages that leak where the shifter seals leak on the side of the transmission. (E-bay, Pro's Choice Transmission Parts) It includes the O-ring seals & pan gasket. I also bought a 'girdle' that fits around the...

My copy of a sales book (listing all options) shows the GT option does not include a deluxe interior. The deluxe interior is listed as a separate (Decor Group) option. Neil

The MCA Grand National is still scheduled for Labor Day weekend. We are contemplating, taking my black GT/CS Neil

No longer available. Neil

Yep. That's the vendor & part. Kinda pricey, $80 + $30 shipping. Neil

For sure. Neil

Rechecked the Marti. Its 140242 VIN. DSO 398N, Theodore Robins Ford, Costa Mesa, CA Neil

I have seen them on a '68 coupe. A telltale sign, if they were ever installed would be the pop rivet holes in the drip rail. Neil

I just saw an ad for the aluminum strips that were installed in the drip rails for vinyl top coupes. A little pricey, but for someone in need its the first I've seen this part available. Mustangs Etcetera, Van Nuys, CA Neil