Search results

They are the same as the 68 Shelby therefore they can be very expensive to find.

Gary, if you are looking for Marchal Fog lights, NPD sells reproductions that are almost exactly like the ones found on the GT/CS, they sell for $369 which is going to be a lot cheaper than a nice pair of orginal Marchals....here is the link...

Gary, For your search on Lucas lights, there are many out there that will state "original" for '68 Shelby & GT/CS, but many are not correct. Here are some things to look for: 1) make sure they have chrome backs (you will see many with black backs) 2) the connection of the wire to the housing...

With the GT option on the GT/CS, the C stripe was delted in place of the GT/CS stripe and the pop open Gas Cap was the 68 pop open cap NOT the GT pop open cap. As for the question on what did the exhaust tips look like for a 302 non GT car, it would have been a single exhaust and there was...

I enjoy what the membership brings me and as green56 stated, I too look forward to the magazine. There are also discounts if you sign up for a multiple year membership. Doug

Welcome to the family (ownership). I think you got a great car (at a great price), it looks like it will make the restoration a straight forward one. We are here to help in any way we can....so once you get the car, send some pictures and start firing the questions our way! Doug

I see it is in the registry, but I don't see any validation of a Marti Report? Has anyone contacted him yet? I just sent him an email to see if it is still available. Doug

Here are some pics of when I was putting in A/C into my coupe. Doug

Here are some diagrams of the vacuum system, as stated there is also a complete diagram of the underdash system in the shop manuals. I put in A/C into my coupe, I did not think it was too difficult just had to make sure I planned it all out first. Since my firewall was original, all the...

Here is what the VIN # on the block looks like, as stated it is located at the rear just below the intake manifold. You can see it with the engine still in the car. Doug

The cloth loom is woven on the wiring, it is not pulled on and there is no cutting. The wire harness MUST be strong enough to, as they say, 'beat the dust out of a rug' since the machine pulls the harness along as it weaves.

Also, NPD sells the unique long radio knobs for only $31.99. http://www.npdlink.com/store/products/knob_set_radio_exact_repro-146093-0.html

Does anyone have a good, up close picture of the orignal tail light wiring cloth loom covering? I want to match the color when I have my wiring re-covered. Is it all black or black with one (or more) braid a different color? Thanks Doug

Tim, only one word....WOW! What an experience! Nicely done! Doug

Buddy, If you can not post pictures it is probably because they are too big, they need to be: bmp: 19.5 Kb (max) gif: 253.9 Kb (max) jpeg: 253.9 Kb (max) jpg: 253.9 Kb (max) pdf: 585.9 Kb (max) png: 253.9 Kb (max) So if they are larger than that stated above, you will need to resize them...

Kahuna, if you are on the island, can you run by and get some info and pics of this car? A VIN would be very helpful (or the door tag info). Thanks Doug

Sorry for the delay but here is the Marti report....It is a real CS: Serial Number 8R01C156235 1968 Built at San Jose Mustang Hardtop 289-2V Engine DOOR DATA PLATE INFORMATION 56235th Ford vehicle scheduled for production at San Jose 65A Mustang Hardtop T Candyapple Red Paint...

With the condition it is in, you are basically buying a VIN #. I ordered a Marti on it but will not get it until Monday, I will post it on here as soon as I get it. Doug

It is very hard to tell from the pics and you almost need to be standing next to it. 68 & 69 headrests look almost identical when they are in the down position, only when they are extended can you tell becuase of the double round posts (68) or single flat post (69). If I would have to guess I...

Rob, thanks..I emailed him! Doug