oldcarhound
New member
- Joined
- Jan 9, 2024
- Messages
- 1
hi, does a 1968 gt/cs with a 390 engine have a partial vin number on the block? back of the block on driver side if it does? thank you
COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
1968 1968 gt/cs 390 vin on engine?
- Thread starter oldcarhound
- Start date
Mosesatm
Well-known member
- Joined
- Jan 18, 2005
- Messages
- 9,178
Here's something from a Cougar site.
The engine was required to be stamped with a partial VIN beginning January 1st 1968. It was a part of the New Federal Motor Vehicle Safety Standard. The VIN on a 390 will either be on the back of the head or just under the back of the head on the block on the left hand or driver side. Since the heads are interchangeable, what was originally the back of the drivers side head would become the front of the passenger side if they were swapped around. If there is no VIN that you are looking at service replacement parts.
The engine was required to be stamped with a partial VIN beginning January 1st 1968. It was a part of the New Federal Motor Vehicle Safety Standard. The VIN on a 390 will either be on the back of the head or just under the back of the head on the block on the left hand or driver side. Since the heads are interchangeable, what was originally the back of the drivers side head would become the front of the passenger side if they were swapped around. If there is no VIN that you are looking at service replacement parts.
Similar threads
