1968 Circuit Breaker

[franklinair]

None of my schematics show the Circuit Breaker that is mounted at the Fuse Panel. (I believe it is to protect the current draw for the headlights & Fog Lights.) What am I missing? Anyone have a schematic that shows the Circuit Breaker?

Neil

 

[Bobsdad]

Hi Neil,
Hopefully this helps, not sure if it'll be that useful.

Sent from my SM-G950U using Tapatalk

 

[Bobsdad]

From the Wiring Diagram book I got through Kentucky Mustang

Sent from my SM-G950U using Tapatalk

 

[franklinair]

I have that drawing, but the Circuit Breaker is not shown.

Neil

 

[franklinair]

The Jim Osborn diagrams DOES show the C/B. The Scott Drake does not.
Thanks to Joe in Crown Point, IN.

Neil

 

[Bobsdad]

Ah good to know, I'll be sure to check those out!

Sent from my SM-G950U using Tapatalk

 

[Restore]

I believe you are talking about the foglight circuit breaker that mounts to the z panel under the fuse box. It is a 10amp breaker same as the standard mustang foglights. interesting note Ford issued a service bulletin in March of 68 recommend upgrading to 25amp because of the Marchal lamps draw. If you want to do this upgrade you can use an AC breaker it is a 25 with same mounting extension