CougarCJ
Well-known member
- Joined
- Jul 17, 2006
- Messages
- 2,220
While doing the cleanup of my engine bay for the disc brake conversion and new suspension I found cracks in my shock towers. This was the good side. I would have missed these two cracks if I wasn't specifically looking for them.
This is the after welding. You can see where the cracking was located.
Here is my starting point. So far I have only rebuilt the door hinges and rehung the doors.

This is the after welding. You can see where the cracking was located.

Here is my starting point. So far I have only rebuilt the door hinges and rehung the doors.
