1968 Sway Bar End Links

[Mosesatm]

Here is a photo of a collection of end link sleeves I've collected over the years, and the link I just removed from a "restored" GT/CS. As you can see the sizes vary a little.
At the risk of opening up a can of worms, will someone please post the correct sleeve length (2 1/4"?), and diameter for a C-code? And possibly the correct bolt length?

Thanks!!

 

[Mosesatm]

Ok, my guess is that I’m not going to be able to remove the shaft with basic garage tools, correct? There is nothing to unscrew.

 

[Ruppstang]

That is a Mogg replacement shaft. You should be able to just unscrew the bolts on the ends. to remove them. Are you replacing them with OEM style ones? I have some like you are replacing if you want that type, they are yours.

 

[Mosesatm]

Luckily I found a greasy old control arm in my pile of old parts and a new shaft in my cabinet of new parts, so it looks like I’m all set.

I’m still going to try to pull apart the one in the photo.

Thanks for the offer, Marty!!

 

[rvrtrash]

Arlie, sorry for the late reply. I looked up the end link kits in my MPC, and it shows all '68/'69 end links are the same, but it doesn't show sizes. Part number is C2OZ-5A486-A. If you need help with that control arm, let me know. I've done a bunch of them.