COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
Thanks for everyone's help
- Thread starter Timmknz
- Start date
hotrodgrany
Well-known member
Looks awsome, great job
Midnight Special
Well-known member
...What Kathy said! Looks like a calender shot to me!!
PonyGal
Well-known member
Nice!!! Looks really good!!
OP
OP
Timmknz
Well-known member
Laser Level to the rescue
If you replace your stripes, get a projecting laser level. The level was easy to work with and the stripes were "Dead ON"! Just make sure your car is setled in the suspension the way you want it and that your garage floor is level, and no more than 1 BEER! And use the template!
T
If you replace your stripes, get a projecting laser level. The level was easy to work with and the stripes were "Dead ON"! Just make sure your car is setled in the suspension the way you want it and that your garage floor is level, and no more than 1 BEER! And use the template!
T
case12
Well-known member
Be a bit careful with the laser level. I had a little trouble doing this, especially at the scoop, because the scoop is angled and then is not the same surface as the door and fender, the line from the laser didnt seem to deal with the 3 dimensions that well. OR, I just didnt know how to use a laser level correctly - which is entirely possible :embarass: Casey
aemoo28
Well-known member
How did this get into the "classifieds" section, Tim?
OP
OP
Timmknz
Well-known member
Dumb Luck -
I probably posted it wrong-
So if John would move it to restoration?
Thanks
T
I probably posted it wrong-
So if John would move it to restoration?
Thanks
T
