Recent content by scott adams

mostly #2 weekend driver. #3 to local shows. #4 have been to the track A few times. about 155,000 miles. 13,000 since restored in 01

I think other than the 65 R model all Shelby mustangs are 80% mustang 20% shelby. the GT/CS HCS is 85/15.

I did continuity check the two black wires at voltage regulator is the ground.

fog light ground the only ground I can fined is 4 wires into two eyelets bolted with voltage regulater mounting bolt. two black and one black and one black with red stripe.

make shure the caliper is slid all the way out on the mounting bracket.

428 Gt/cs

Hi Grant I live not to far froum you just out side of pendleton OR. I hope you have good pair of driving gloves on when you start that up.

very nice love the red paint, i'm jealous to

yes it has stock 9" 59 5/16" at axle. I do trailer to track but I have driven it to 200 miles one way.

no with 5.5 back spacing on a 15x8 wheel and a 1/4 shim out they fit with very little tire rub. competition engineering slide-A-link traction bars helps to they lift on take off.

that 13.20 was with 3.25 gears and street tires. my best was 12.95 @113mph with 28x11.50 slicks and 4.11 gears it ran 11.69 @ 119.88 mph

thats a 7qt T pan. .030 over std.428 block edelbrock heads, victor single plane intake , solid roller cam, roller rockers, 1000 cfm HP holley, MSD 6AL ign. 450 HP at rear wheels

they are almost twins

thanks Jason I sent email