Search results

Tom a lot of those small options were added latter by the dealer. Marty

You are right I did not have the brain in gear! You can get to the horn points with out pulling the wheel but not the turn switch. I would try jumping across the horn contacts before I pulled the wheel. Then if they still do not work pull the wheel and check across the horn contacts on the turn...

The floor console was a single option. Interior Decor Group Included courtesy door lights with grill, roof console, bright trim on pedals, wood grain instrument panel door panels steering wheel and over head console, vinyl insert on shifter if automatic, bright trim buttons on seat backs...

You do not have to pull the steering wheel to service the turn switch or the horn points. Marty

The clock option was part of the deluxe inteior package but I think it could have been ordered seperately.Marty

I think NPD has one for like $169. or you can pay 400 and have yours restored.

I am no expert but I would say 16500 -20500 with the information given. Look at NADA classic.com but remember that those prices will be a bit high as based on past sales. Good luck Marty

I think I saw that NPD has the bolt on style. They were mounted with self tapping bolts so all you would have to do is drill the holes. Marty

Neil I have a pattern to cut the console. PM me you fax # and I will send it tomarrow. Yes there is a extention boot. I think NPD has them. Marty

Thank you very much for all of your hard work! It was a very well orgnized show. I really enjoyed the police chief swearing us judges in and giving us badges. I saw your car but did not find you, it is busy for me too with the judging. I did get to talk to the owner of the white GT-CS. That was...

There were two styles of axel bumpers, the push in type and what you have is the base of the bolt on type. The rubber has come off the metal. Marty

Bill it was nice to meet you and your little traveling companion dog. I think it is amazing that you have driven your car 450K+ miles since new and it still lookes so nice. Good luck on the rest of your trip! Our club brought seven cars to the national and we took seven trophies home. I sure am...

My 7-20-68 HCS C code has the vacuum moter I am not certain that it was orginal. Marty

No I am not going to start singing! We are headed to Mustang Oklahoma to the MCA national meet to day. I think Traveled GTCS is going, but I haven't heard of anyone else. We are taking the green 67 GTA convertible. Come by and say hi. Marty

Oscar, Tape off the moldings. Get a sharp heavy duty box cutter lay the blade flat on the glass cut through the rubber seal and the sealent. BE VERY CAREFUL! cut away from your self. Start with the top molding. You may not save the first one. The bottem is allways the worst. Push out the...

It realy is not black. It will be ok Neil

Thanks Scott, Thats is what I thought but it is good to have your conformation. I have not seen too many orginals. I am suprised you are not making them yet. You always have the good stuff. Marty

Neil, I use the NPD paint as well. It is very thin so I spray a coat of flat black first. Thin coats are better. Be sure to keep shaking the can as it settles out quickly. You can vary the level of gloss by holding the can closer for glosser and further for flater. Good luck Marty

My HCS has Ford tips on it. I found what was left of the part # and the Ford stamp. They appear to be chrome plated steel not the stainless steel like all the reproductions. Can someone tell me if the chrome is correct? If they were chrome I will have these replated. Help Jeff S. or Scott F. Martyl

Here is a pic of a correct C8 AM-FM that I bought on Ebay. I asked if it wires were cut or if the lens was cracked they said no. I had to send it back to him with some help from Ebay. So if anyone has one or know where I can find one let me know. I might add if you see one that looks like this...