Search results

I'm not aware of any possible "adjusting". If it's not returning check for binding......and that the spring is still attached to the flapper.

Check for binding of the flapper. You need to let it cool off sufficiently as well....it doesn't happen instantly! The fact that it opens means it's more than likely working properly since it has overcome spring pressure to open in the first place.

And then some! Congrats....

The original coils from my S code CSGT with the GT equipment group had yellow and green markings. They are 9 1/2 coils and 16 1/4" high with a .640" cross section . The sway bar also has yellow and green markings and is 15/16ths". I can post a pic later if wanted.

Interesting..... Does that make it more or less valuable I wonder? Or no diff?

Hold on, I want to see what happens with Australia....

I'm interested. Send new pics of what you have now. Let me know how much more you will want for it in addition to my 67 setup. Shipping is gonna kill us....????

I'm looking for a 68 390 GT air cleaner. I have a 67 I could trade with or just buy one outright..... Grant

Well, I thought the % added for the engine options was far more realistic at least. NADA's 10% or 15% for a 390 GT is way off in my opinion! 60% for the 390 and 120% for the 428cj seems a lot closer to reality, though the rarity of these engines in these cars makes for a limited data base to...

Why not put this info under the "Price Guide" in the Forum?

Can't delete for some reason....

Iv'e repainted a couple. If needed, I removed the last of the paint first w zip-strip... then I'd get a tiny brush and apply the correct paint very carefully. I think the black is a semi gloss...... the trick is applying it evenly so as not to have a mottled look. It usually took several coats...

I have some I could sell. I need to replace them with aqua. Here is a picture. Let me know if you are interested and we can haggle.....

Aqua S code with 428cj and 4-speed I have an S code that I put all 428cj drivetrain in. Big spline toploader close ratio, 31 spline axels may have N case I'll have to look. It's an actual GT as well and has an 8,000 rpm factory tach. I havn't put the stripes on yet or the rockers. I added a...

My Aqua 390 GT Here is my marti....well, part of it.

My car is gulfstream aqua with two tone aqua interior. I am trying to figure out what color stripes as well..... Right now I'm leaning towards white, red or gold.... Is gold definitely wrong?? I'm thinking it might look cool but I don't want to do it if they NEVER came that way.....

Thanx, I see the sprint package above @ 10% but not the GT.... That being said, I have all 428cj running gear at the moment. I wonder how that affects the price? Personally I would prefer to have it this way....but I can see that to a purist it might make it less valuable. I'm thinking of...

GT package value? I didn't see a value for the GT package or for competition suspension. I have an "S" code 4-speed CSGT w the GT package and 8,000rpm tach. Would that just be part of the 60% you get for the 390 4v engine?

Interesting topic. I have an S code 4-speed GT/CS and a Marti... It has the GT option listed, but no tach is listed. It has an 8,000 rpm tach with a 120 mph speedo and trip meter. I bought the car in 1976. I always wondered about the tach....and yes, all the idiot lights work. Why would a big...

Sounds like you are going the extra mile and replacing just about everything... I had a similar problem w my 70 Torino Cobra. After putting a second pump on and having the same problem I went to a hydraulic shop and had them make me a pump pressure tester for about $30. Sure enough after testing...