• Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.

    If you have problems registering or can't log into your account, please contact Admin.

    Please Note: If you are an existing member and your password no longer works, click here to reset it.

1968 Doug is waterproof once more

mbsf1970

Well-known member
Joined
Apr 10, 2013
Messages
795
Location
Calgary Alberta
Yesterday afternoon, I spent 4 hours with a classic car windshield replacement specialist. He clearly had a LOT of experience. He didn't stop for the entire time and man did he do a great job! He power sanded off a little rust at the base of a rear window corner, got it down to bare metal, sealed it with primer and then continued.

When all the dust had settled, he had removed, cleaned, resealed and reinstalled the rear window. So nice to no longer have any leaks!!
We also took the time to install a new windshield (Fomoco) in the front. Its gorgeous and clean and the best part -- hard to believe-- it was the original windshield!! It didn't NEED to be replaced but it had a chip in it and I didn't want to spend all that money to replace the seals only to perhaps have the chip run at a later date. The blue band at top of windshield looks so much better than the faded to gold old band!!
It's so clear to see through now!!

As a BONUS, while he removed and prepped the front and rear areas, it gave me time to remove all the overspray areas from the stainless trim pieces as they hadn't been removed at the time of the last paint job.

Doug gets to go to a car show later tonight with his new glass and paint-free trim!! Very excited.

Stephen
 

Toy68CS

Well-known member
Joined
Jun 29, 2015
Messages
59
As a BONUS, while he removed and prepped the front and rear areas, it gave me time to remove all the overspray areas from the stainless trim pieces as they hadn't been removed at the time of the last paint job.

What did you use to remove the over spray?
I have quit a bit on the car I just bought and want to know the best way to clean it off.

Thanks
 
OP
OP
M

mbsf1970

Well-known member
Joined
Apr 10, 2013
Messages
795
Location
Calgary Alberta
What did you use to remove the over spray?
I have quit a bit on the car I just bought and want to know the best way to clean it off.

Thanks

0000 Steel wool and lacquer thinner.

I was quite tentative at the outset but it turns out that the trim is almost bombproof -- if original of course.

I used the side of a razor blades to scuff paint and then was pretty aggressive with wool and lacquer thinner. I then washed all the pieces prior to re-installing.

Stephen
 
Top