nfrntau
Well-known member
Removal
1. Disconnect the battery ground cable from the battery.
2. Insert the ignition key in the switch.
3. Turn the switch to the accessory position (turn the key counterclockwise).
4. Insert a wire pin (paperclip works well) in the hole in the ignition switch.
5. Slightly depress the pin (little button under hole in that position) while turning the key counterclockwise past the accessory position.
6. This will release the the lock cylinder from the switch assembly.
7. Pull out the lock cylinder with the key.
1. Disconnect the battery ground cable from the battery.
2. Insert the ignition key in the switch.
3. Turn the switch to the accessory position (turn the key counterclockwise).
4. Insert a wire pin (paperclip works well) in the hole in the ignition switch.
5. Slightly depress the pin (little button under hole in that position) while turning the key counterclockwise past the accessory position.
6. This will release the the lock cylinder from the switch assembly.
7. Pull out the lock cylinder with the key.
