I tracked down a set of Marchal 656 lights in the Netherlands for about $300. Is that a good price for original? Any pitfalls I should be aware of when purchasing something like this? I'm assuming I may have to modify the wiring. Any advice would be appreciated. Thanks.
COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
Marchal 656 Lights
- Thread starter AADaddy
- Start date
Marchal 656
Be careful purchasing these lamps from overseas on ebay because I have noticed a couple of sellers advertising them as original 656 Marchals when infact they are the same reproductions you can get from NPD. If you got them from Italparts.com then I would trust they are originals. He has been selling them for a long time as well as a lot of other rarer parts. $300 is a good price if they are originals and in good working condition with good chrome and uncracked glass.
Be careful purchasing these lamps from overseas on ebay because I have noticed a couple of sellers advertising them as original 656 Marchals when infact they are the same reproductions you can get from NPD. If you got them from Italparts.com then I would trust they are originals. He has been selling them for a long time as well as a lot of other rarer parts. $300 is a good price if they are originals and in good working condition with good chrome and uncracked glass.
somethingspecial
Well-known member
- Joined
- Aug 13, 2005
- Messages
- 1,795
wiring harness
I found the 1967 fog light wiring pigtail, P/N 15A211-2A, has the correct male bullet type plug for the Marchal lights. It is a two wire pigtail that can be split to make one wire per light. The original Marchal lights only had one wire and was internally grounded through the light body. Only one pigtail assy. is required for one set of two lights. Hope this helps.
http://www.npdlink.com/store/products/pigtail_fog_light_bulb-102162-0.html
I found the 1967 fog light wiring pigtail, P/N 15A211-2A, has the correct male bullet type plug for the Marchal lights. It is a two wire pigtail that can be split to make one wire per light. The original Marchal lights only had one wire and was internally grounded through the light body. Only one pigtail assy. is required for one set of two lights. Hope this helps.
http://www.npdlink.com/store/products/pigtail_fog_light_bulb-102162-0.html
Cool, thanks! I ordered the lights from the guy. He took them all apart and took pictures for me. They were stamped April 68 inside, which I like even better! With shipping I got them for under $400. Now I just need a fog light switch! The previous owner said to me they never worked and he couldn't figure it out. That would be because A) you don't have a switch to turn them on and B) they are not even wired up. Just some Aris lights put there to replicate the lucas look. At least it appears the harness is there!
