classicsguy
Well-known member
- Joined
- Aug 21, 2002
- Messages
- 1,535
What are the factory correct screws for the GT/CS side scoops?
COMMUNITY
1968 GT/CS & HCS
2007+ GT/CS
1966-1967 HCS
-
Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.If you have problems registering or can't log into your account, please contact Admin.Please Note: If you are an existing member and your password no longer works, click here to reset it.
1968 Side scoop screws?
- Thread starter classicsguy
- Start date
GT/CS S Code
Well-known member
Go to "The Source" ...!
Your best bet is to contact Bob T (Mr. HCS!), who has complete rebuild kits for the GT/CS and HCS side scoops, including the proper screws.
We got a pair from him to rebuild our side scoops during the restoration work we did on our car and they are awesome kits at a reasonable price!
:grin:
Your best bet is to contact Bob T (Mr. HCS!), who has complete rebuild kits for the GT/CS and HCS side scoops, including the proper screws.
We got a pair from him to rebuild our side scoops during the restoration work we did on our car and they are awesome kits at a reasonable price!
:grin:
classicsguy
Well-known member
- Joined
- Aug 21, 2002
- Messages
- 1,535
Thanks GT/CS I just sent Bob a private message.
dalorzo_f
Well-known member
Shelby's used a 53039-S2, Tapping Screw, Oval Trim Head, Phillips, Type A (coarser thread than AB), #10-12, 5/16" (.308/.332")OD, 3/4"L. Phosphate and Oil finish.
One could assume the same for rhe CS as the scoop its pretty much the same part, but that is a semi-educated guess.
AMK part below is close, but CAD not P&O.
http://amkproducts.com/bulk3.asp?part=B%2D12223
One could assume the same for rhe CS as the scoop its pretty much the same part, but that is a semi-educated guess.
AMK part below is close, but CAD not P&O.
http://amkproducts.com/bulk3.asp?part=B%2D12223
