• Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.

    If you have problems registering or can't log into your account, please contact Admin.

    Please Note: If you are an existing member and your password no longer works, click here to reset it.

Tail light harness pictures

pnsy56shop

Well-known member
Joined
May 1, 2009
Messages
52
Location
Berlin, NJ
Help, I need some pictures of the GT/CS tail light harness. could someone post some pictures of the harness. Does anyone know what the difference is between the Tbirds harness and the GT/CS harness is? :icon_pani
 

dalorzo_f

Well-known member
Joined
Jan 7, 2006
Messages
1,886
Location
Brisbane Australia
I believe the Tbird was a 2 wire setup, I just bought a Shelby tail panel and buckets wires and they did not have the 6 pin connector, so thinking the seller sold me Tbird as Shelby, which is OK as I knew the wiring was stuffed anyway.

The Tbird 2 wire works all lights in tandem as on the GT/CS, but is due to how the wiring was setup, as the 6 pin also allowed the sequential for the Shelby as each wire to the turn curcuit was individual from the plug to the bulb in the 6 pin version.

In the 2 pin Tbird it was on-off for each complete circuit, brake or turn.

... I think....
 

rvrtrash

Well-known member
Joined
Apr 25, 2003
Messages
3,683
I'm not a T-bird expert, or even reasonably knowledgable, but there's a good chance that the '64 Bird was a 2 wire harness and the '65 was six wire.

Steve
 
Top