Search results

pertronix I picked up the 12v right from the fire wall going to the switch from their right to the coil new wire

pertronix no it is a new wire pertronix keeps saying i have low voltage but i have 13 v at the coil with car running but it still cuts out they say is to put every thing back in and turn the key on not start car and see what voltage i have iam just going to send every thing back and stay with...

pertronix Rob used the Pertronix 3 coil also their Moduel I called their service dept but he keeps saying that i have low Volts check coil 13 Volts Tom

well installed 2 coils and 1ignitor 111 and none of them work i guess i had my fill of that company any body have a nother good unit check voltage at the coil have 13 v took every thing out put the yellow top and points back in runs Would like to put a nother electronic back in Thanks Tom From...

engine paint The Plastikote 224 is no longer made no store in Milwaukee has this paint? any bodyhave any ideas? picked up a Duplicolor that says dark corp blue to light according to the cap dont want to spray they wont take it back

Does any body know were i could get the dark corp Ford blue looked at Duplicolor not a match looked at a couple others don't match it is a very dark blue don't need a have a couple of chips would like a spray can easier to use? Thanks Tom from WI

carb 2100 Bob will get the info Fri right now 92 out side so the garage is hotter will post Fri the car just don't seem to run right I just put in a pitironx 111 but the coil was bad so i had to get a new one the i had problems with the dash pot i know i can not use it but i like to keep it Org...

Would like to know the 2100 carb does that carb fit all 289 engines 2bbl cars? so if they have one for sale and it says 66 would that fit on a 68 Thanks Tom from WI

Dash pot& spring Would like to thank every body for their answers and were to get parts. Would like to keep car as much org as possible,if i can afford the parts Thanks very much Tom from WI

need help need a 68 Dash pot & return spring for my 68 check parts houses they don't have them they said nobody makes them check NPD-Mustang Unlimited Tony Branda Napa so if someone has one and would like to sell it please let me knoe also the return spring Tom From WI

First it was the signal swtch now i have to replace the dimmer switch to replace all you have are the two screws that go in the floor and replace the wires or do i need this auto head light dimmer? what is happing is the switch just goes down and does not click comes right up thanks Tom WI How...

Stop lights Ok Guys had to replace the signal switch it was bad they don't make them like they use to Tom WI

Need some Info My left side stop light does not work i check the ground wire that is ok but were do i go from here checked the bulbs they are ok Do you think it is the signal switch? Tom From WI

paint Thanks every body for the info just orderd the paint i needed thanks again Tom WI

I am trying to get some paint for my 68 Acupulco blue i need some touch up paint i check my two books but i could not find any color paint help Tom WI

Were can i get some car paint i need the Acupulco blue i looked at NPD and mustang unlimited found paint but nothing i casn use Tom from WI

pertronix I just took a compresion test on all 8 the readings were 150 to 155 so that seems good, Was going to a car show but it rained and getting hot as the hours pass the humidity is about 65 t6o 70 % high to sit out in the open you would roast. Roads are wet and it is in a open park so the...

per i hope i bought the right parts let me know if i did something wrong I bought the pertronix ignitor 3 and the flame thrower for 45,000 volts this is what the counter man said i did not need a rev limiter so if it is wrong could you let me know thanks everbody for your help Tom from WI

pertronix so if i getthe ignitor with the flame thrower coil would that all i would need if i get the ignitor 2 it does not come for a 68 Then a nother parts book ask if it is amale or female i dont know or vac advance or mech advance the coil i under stand but every thing else i dont help Tom

i would like to put a Pertronix distrib and new coil to match for my 289 2 bbl or what other parts that i would need Their are a few in book but i would not know which one to get any help would be appreciated thanks Tom from WI