Animal
Member
I have been thinking of selling my CS for a while and thought I would start here with CS-HC people. I have a few pic's, but will take and post some new ones this weekend when I can pull it out of the shop. I do have a MARTI report and will post it as well. The car is Wimbledon White with red interior. The PO had the car painted and it's definitely not show quality but decent for a driver. The interior is good, new fuel tank, I have the lucas sq 8 lights for it, The engine is strong and is original to car along with the top loader. The wheels are after market (PO) and look like crap on the car but that's an easy fix. Body is free of rust and the PO did the floor pans at some time. The stripes are red and is missing the front section on each side.
If your interested in the car you can PM me and set up a time to look at the car. If you have a local person to check it out for you, that's OK too. Bob Teets has been to my house several times over the years and he would be a good source to come look at the car, but I'm not sure how well he's doing right now. Some things needed: correct air cleaner assembly; console; new hood hinges; fog light mounts and drilled...Bob Teets used to make these, not sure if he has any left; new original shackles; radiator shroud; fan/clutch; reverse lockout shifter cable; new door hinge pins; stripe on ft. fender; wiper motor re-attached; misc. under hood items and a few other minor items on car. NOTE: The after market finned aluminum valve covers and air cleaner do not go with the car, I have the original chrome (power by Ford) covers and an after market open element air cleaner that go with the car.
(Sorry!! I had to attach the other pic's in a reply post below. I think the pic's are too big to fit into this original post, and it's late, and I build homes....and I don't sit at a computer much
Let me know if you would like a pic of a particular location on the car.
Thanks
Terry
If your interested in the car you can PM me and set up a time to look at the car. If you have a local person to check it out for you, that's OK too. Bob Teets has been to my house several times over the years and he would be a good source to come look at the car, but I'm not sure how well he's doing right now. Some things needed: correct air cleaner assembly; console; new hood hinges; fog light mounts and drilled...Bob Teets used to make these, not sure if he has any left; new original shackles; radiator shroud; fan/clutch; reverse lockout shifter cable; new door hinge pins; stripe on ft. fender; wiper motor re-attached; misc. under hood items and a few other minor items on car. NOTE: The after market finned aluminum valve covers and air cleaner do not go with the car, I have the original chrome (power by Ford) covers and an after market open element air cleaner that go with the car.
(Sorry!! I had to attach the other pic's in a reply post below. I think the pic's are too big to fit into this original post, and it's late, and I build homes....and I don't sit at a computer much
Let me know if you would like a pic of a particular location on the car.Thanks
Terry
Attachments
Last edited:
