Search results

Can someone tell me the secret to removing the lock barrel from the ignition switch? I know I have to insert a paperclip into the small hole but where from there? What does the wire push on or engage to release the locking mechanism?

Well the #5 fit perfectly. Thanks for all the help.

I picked a #5 metric nut up yesterday but havn't had a chance to see if it fits yet, I'll let y'all know how it works out. Stay tuned

The top mount came in and I'm happy to say the pads were in excellent condition. I still have to work out the bottom pads. Does anyone have a photo in their archives of the lower mounts installed. I looked today and it appears I am going to have to drill some mounting holes. Thanks Bill

Trying to install an after market instrument panel bezel today and ran into a small problem. I couldn't get the original nut to twist onto the screw post located on the right hand side of the bezel. It didn't have a nut on it when I got it. Does anyone know if it was supposed to have a nut and...

Since the holes are already there.. You could use pan head screws with nylon locking nuts. Then use the wire loom loops (the white ones Jon suggested) and it would look good and work well without using self tappers. The nylon works really well to keep them tight. You can buy the nylon locking...

No comment Just teasing, I have no idea either.

Yep, that's a better angle of the rear ones as they reflect the way they are installed better.

Here they are

Front bumper guards when present - Chrome no rubber bumper insert Rear bumper guards when present - Body color including rubber bumper insert

Wouldn't that be alcohol abuse??

This sounds like the plan. I'll measure the bottom of the radiator and keep my eyes open for a piece of channel. If some real ones pop up in the meantime.... I may still have to purchase the top pads. I'll have to wait until I get the bracket to find out. What do the pads look like? I have...

I don't have the convenience group so no light. That's good to know. I hate finding wires and wondering where they go. Good call on the prop valve. Thanks guys

Can someone post a photo of an emergency brake switch (parking brake warning light) that is installed. I never removed one from the car but I now have a wire to connect to it. (came in the new harness). I am assuming it lights the pony in the center of the dash bezel. I'm just curious where it...

He didn't have the lower mounts. So I'm still hunting

I sent the seller a message letting him know if he has them I would like them. I have not received a response yet. I'll let yall know how it turns out. Thanks for the link. Cheers

That would be it, thanks

No, not the flat pieces left and right. It would be the support pieces on the bottom and the hold down on top. There were two different size radiators used. 6 cyl and 289/302 without air received a smaller width radiator that bolted to the radiator support and had the flat pieces on the side...

Do any of you have an extra set of upper and lower radiator mounts lying around?

I've read quite a few times about persons driving GT/CS's (both old and new models) that never heard of our website or the registry. Some people buy a car and want to know EVERYTHING about it. History, options, colors, codes, years made, etc. Some are computer literate (at least a little) and...