franklinair
Well-known member
- Joined
- Mar 1, 2007
- Messages
- 4,744
I just replaced the rear springs, bushings, and shackles - all stock items, new.I'm trying to establish the correct, stock heighth of the body- using the wheel (fender) openings as a reference point. Prior to replacing these parts I measured from the ground to the highest point of the rear fender openings. They measured 24 inches. After replacement the measurements are 25 inches. Tire inflation was not changed. The old springs were original - marked with the C7 part number. After 40 years they were tired & sagging!
The front coil springs were previously replaced. The measurement on these openings are 26 inches from the ground to the high point of the fender opening. I'm using F70-14 tires, all equally inflated with stock wheels.
Any comparison measurements/info would be appreciated.
Hope to meet many Mustang Folks at Grass Valley.
Neil Hoppe
The front coil springs were previously replaced. The measurement on these openings are 26 inches from the ground to the high point of the fender opening. I'm using F70-14 tires, all equally inflated with stock wheels.
Any comparison measurements/info would be appreciated.
Hope to meet many Mustang Folks at Grass Valley.
Neil Hoppe