Mosesatm
Well-known member
- Joined
- Jan 18, 2005
- Messages
- 9,144
OK, here's the deal; I'm getting ready to go full highway cruiser with my GT/CS, but before I go to all that work and expense I'm offering it only here for a price that seems to be far below the market value, but what I think is a fair price since it covers my costs.
The car isn't perfect......yet. Here are the items I'm going to fix if no one buys it, and I keep it.
- Heater cables - I have new ones
- The master cylinder is old and crusty but the brakes work fine - I'll probably replace it since I have an extra, and maybe add a booster.
- The brake pedal is overly sloppy - I have the bushings
- The car has a 9" locker with unknown gears. It's too loud for my taste and I'm going to install open gears
- I think the 4-speed and clutch are fine. The transmission may have been rebuilt because it's really tight until it warms up.
- I installed a reproduction tach that isn't working correctly, and the new oil light keeps flickering. The gauge cluster needs to come out to see what's going on.
- The passenger vent window handle doesn't want to seat fully on the stud. Haven't dug into that issue.
- I also have an overhead console for the car. It needs to be dyed and installed.
No huge issues, just basic old car annoyances.
The engine runs great. It has new tires and wheels, battery, front suspension, carpet, shifter, etc. The exterior chrome is nearly perfect. I installed '69 headrest seats and replaced the seatbelt chrome. The only real issue with the interior is the radio bezel is pitted. That's another quick fix I haven't gotten around to.
If anyone is interested shoot me a note. I'll add photos to a dropbox, but will need your email so you can access them.
I'll add more photos here after I reduce them.
Here's a link to the drop box. Hopefully, it works.
https://www.dropbox.com/home/Mustang
The car isn't perfect......yet. Here are the items I'm going to fix if no one buys it, and I keep it.
- Heater cables - I have new ones
- The master cylinder is old and crusty but the brakes work fine - I'll probably replace it since I have an extra, and maybe add a booster.
- The brake pedal is overly sloppy - I have the bushings
- The car has a 9" locker with unknown gears. It's too loud for my taste and I'm going to install open gears
- I think the 4-speed and clutch are fine. The transmission may have been rebuilt because it's really tight until it warms up.
- I installed a reproduction tach that isn't working correctly, and the new oil light keeps flickering. The gauge cluster needs to come out to see what's going on.
- The passenger vent window handle doesn't want to seat fully on the stud. Haven't dug into that issue.
- I also have an overhead console for the car. It needs to be dyed and installed.
No huge issues, just basic old car annoyances.
The engine runs great. It has new tires and wheels, battery, front suspension, carpet, shifter, etc. The exterior chrome is nearly perfect. I installed '69 headrest seats and replaced the seatbelt chrome. The only real issue with the interior is the radio bezel is pitted. That's another quick fix I haven't gotten around to.
If anyone is interested shoot me a note. I'll add photos to a dropbox, but will need your email so you can access them.
I'll add more photos here after I reduce them.
Here's a link to the drop box. Hopefully, it works.
https://www.dropbox.com/home/Mustang
Attachments
-
Marti.jpg108.1 KB · Views: 181
-
One of One.jpg134.3 KB · Views: 140
-
Side.jpg100.4 KB · Views: 192
-
Dash Area.jpg104.6 KB · Views: 160
-
Seats.jpg94.7 KB · Views: 111
-
Headliner Wrinkle.jpg94.6 KB · Views: 123
-
Engine 2.jpg102.1 KB · Views: 127
-
Engine 1.jpg115.2 KB · Views: 125
-
Paint Run in Trunk.jpg114.6 KB · Views: 123
-
IMG_4404.jpg83.5 KB · Views: 119
Last edited: