• Welcome to the CaliforniaSpecial.com forums! - You are currently viewing the forums as a GUEST. To take advantage of all our site features, please take a moment to join our community! It's fast, simple and absolutely free.

    If you have problems registering or can't log into your account, please contact Admin.

    Please Note: If you are an existing member and your password no longer works, click here to reset it.

. carb jetting

66hcs-conv

Well-known member
Joined
Apr 1, 2007
Messages
370
Hi gang,

1966, 289, 2V, single exhaust

We have moved from 7500 feet altitude to 5000 feet.

Anybody got any idea what size jets I should be using, or how much larger I need to go for 2500 feet lower altitude?

Thanks for your help. Dave
 
OP
OP
66hcs-conv

66hcs-conv

Well-known member
Joined
Apr 1, 2007
Messages
370
Thanks for the web site & the information.

The Holly web site recommends a higher numbered jet for a higher altitude.

The Ford shop manual recommends a lower number jet for a higher altitude.

The shop manual says a # 48 jet for "altitude". Problem is they don't say what altitude they are talking about.

I be confused !
 

Mosesatm

Well-known member
Joined
Jan 18, 2005
Messages
9,364
Thanks for the web site & the information.

The Holly web site recommends a higher numbered jet for a higher altitude.

The Ford shop manual recommends a lower number jet for a higher altitude.

The shop manual says a # 48 jet for "altitude". Problem is they don't say what altitude they are talking about.

I be confused !

It seems to me that the car will run rich at higher altitudes, due to less oxygen in the air, so the carb will need smaller jets.
 

davidathans

Well-known member
Joined
Jul 25, 2004
Messages
703
Location
San Fernando Valley, California
It seems to me that the car will run rich at higher altitudes, due to less oxygen in the air, so the carb will need smaller jets.

i concur. But he is going from 7500ft down to 5000ft, so there will be a higher oxygen concentration, therefore he will have to increase his jetting or he'd run lean. If he were moving up to the higher altitude then he would need to decrease his jetting, but he is moving from a higher altitude to a lower altitude therefore he will need bigger fuel jets.
 
Last edited:
OP
OP
66hcs-conv

66hcs-conv

Well-known member
Joined
Apr 1, 2007
Messages
370
It seems to me that the car will run rich at higher altitudes, due to less oxygen in the air, so the carb will need smaller jets.

Correct. I agree, the higher in altitude, the smaller the jet.

The Ford manual calls for a # 50 jet, for "normal" operation and #48 for "altitude" operation. Assuming the altitude operation is for Denver, that would follow the 1 jet size for every 2,000 feet rule, and I would go 2 sizes down from a # 50 jet to a #48.

I'll give that a try, drive it, and take a look at the plugs.

THANKS for the input.

You new Mustang owners with fuel injection are missing all this fun!
 

rvrtrash

Well-known member
Joined
Apr 25, 2003
Messages
3,683
You new Mustang owners with fuel injection are missing all this fun!

Yes, these new cars are just no fun at all---very boring. :grin:

Steve
 

Attachments

  • SDC16857.JPG
    SDC16857.JPG
    59.3 KB · Views: 48
Top