Search results

Scott, I don't remember how I noticed that one side was higher than the other and I don't notice it when I'm driving. It's probably not even noticeable to the average person but it just annoys me because I know it's there. I thought one spring may be sprung more than the other so I swapped...

I've never seen this color combination before. It's quite striking. http://westernmass.craigslist.org/ctd/1932086214.html

Jon, My camera takes photos at a 1.33 ratio but 1800 x 1200 is 1.5. Do you want a particular width to height ratio?

Mike, The housings are actually chrome so you can use chrome polish on them. Just be sure you don't polish through the chrome. The lenses are sealed to the housings with plain old household window putty so you can separate them by SLOWLY pulling them apart, then replace the putty or use some...

No rear bracket. Only one in the front. Fastbacks require the rear bracket. http://californiaspecial.com/forums/showthread.php?p=2269&highlight=ceiling+console#post2269

Here's a 3-speed car but it would be easy to install a 4-speed or even a 5-speed. http://dallas.craigslist.org/ndf/cto/1873533725.html How much do you want to spend...

These are the correct covers. Doug, I do have one stray later cover that is in good condition, not perfect, but pretty darned good. I'll send it to you if you want it.

Yes. The rectangle-eye covers are from the '70s I think.

Doug, I'll check my supply this evening.

I ruled out the quarter panel by placing a level across the tail lights and they are as unlevel as the wheel openings seem to be. The car was hit in the front at some point so that wreck may have tweaked the unibody but I can't see any sign of it. I'll take a few more measurements then take...

Hmmmmm, tempting, very tempting. And a month ago I swore I would never make that drive again:frust:. Oh well, Steve still owes me a drive in the Tiger so I'll be there as a visitor. The Denver show in June will make for a good warm up trip!

Measuring to the top of the wheel well openings I get the following dimensions: LF = 25 1/4" RF = 25 1/4" LR = 25 3/8" RR = 26" What the heck is with the right rear? Any thoughts on how to lower it by 5/8" or raise the other side?

Try going into User CP, then click on Edit Options and check the box that says "Enable Private Messaging".

Ha, you read my mind. I was just going to make that comment! Did you pass on that Texas car? Your PM function is turned off.

For those who want to make their own model GT/CS. http://cgi.ebay.com/68-MUSTANG-GT-CS-1-25-resin-trans-kit-MINI-EXOTICS-/260657150650?pt=LH_DefaultDomain_0&hash=item3cb0607aba Rob, please make sure you're sitting down when you read the auction description, and have some paper towels ready to...

July 1979 Car Exchange

A '67 grill can be purchased from Ron then easily modified, or I think you can buy one already modified from Somethingspecial (Mike). The Marchals are being reproduced and can be purchased from NPD and used ones are on eBay fairly regularly. Hood pins and all the associated hardware can also...

Rob, you out there? This may be an interesting car to check out for your little research project.

I think this one has been posted before but I'm too lazy to look for it.:embarass: http://oklahomacity.craigslist.org/cto/1913059523.html

I used double-stick tape on one and RTV on the other. Both methods seem to work fine.