Search results

Here's a thread I sent a few years ago. May be of help to anyone working on wiring. Do a thread search for Wiring Info posted by franklinair, I think in 2019. I just now posted it on Facebook. Neil

With the sender wire disconnected, and the key On, what does the gauge read? Neil

Do me a favor: 1.) Remove the wire from the Fuel Sending Unit, and turn the Ignition key to the ACC position. The fuel gauge should read empty. If it does not read empty, the wire from the Sending Unit is Grounded somewhere leading to the Gauge. 2.) If the Gauge is reading empty, ground the...

As an alternative depending on your need- Google Midlife Harness. He does excellent work, reasonable $$. Neil

Did I miss something? The thread from 2011 says none available. Are they now available? Neil

Thanks, Jon. Just what I needed to know. Neil

I just acquired a pair of '69 seatbacks with headrests. I've not had occasion to go into these before and am not familiar with the mechanism inside the seatbacks. My question is- do the headrests just pull all the way out, or is there some sort of release inside the seatback mechanism in order...

The Marchal lites mount on the Grill. The Lucas lites mount on the wide grill trim, and use the pedestals that Arlie made. Neil

Be sure the block & heads are thoroughly flushed, have the radiator core checked & cleaned, and install a coolant filter (splices into the upper radiator hose). CJ Mustang sells them (about $35). Neil

Correct, Only the instruments are powered by the IVR. The instrument lights are 12V powered by the Alternator & Voltage Regulator. LEDs and clean diffusers (the blue light bulb covers) would brighten the dash lights.

Found this by accident in my photo file. Here's a photo of an old man working on a Mustang! Neil

Here's a photo of the NPD Condenser which is the type I've used in the past. Neil

Look up NPD P/N 19712-2. It shows a photo of a correct condenser. Neil

A great video I shared it to Facebook. Thanks, Arlie. Neil

As Steve said, virtually everything comes out of China. I have no specific favored manufacturer because of that. Shop the various vendors for the best pricing. Large $$ orders have free shipping cost. When I re-do suspension I do everything: UCA, LCA, coil springs, coil spring saddles, strut rod...

I agree. $60K MINIMUM for this car. Neil

With my limited physical status (but with the help of my son-in-law) it was a year+ to complete. As I said, everything needed attention. On '69 & '70's the entire dash assembly must be removed to replace the heater core. Not like '67 or '68's. Replaced all suspension components, all new...

My computer skills prevail. Don't know how to relocate the thread. Maybe Jon can help.

I finally finished the '70 Convertible for my friend in Florida. More work than I had anticipated: Engine, Electrical, A/C, Body, Interior, Suspension. Neil

I used WCCC's Plasma LED's. Kinda pricey, but they DO light up the world. Neil